|
 SANDVIK ClikLoc Connector
Sandvik ClikLoc is a patented rapid-action connector suitable for demanding topside and subsea applications. Thanks to its revolutionary design, Sandvik ClikLoc reduces the time needed for make and break to 20-30 seconds, instead of the 15 to 45 minutes required by most conventional connectors.
Sandvik ClikLoc is designed according to ISO 13628-7 requirements, with either metal-to-metal seal or soft seal. A minimum of moving parts makes operation simple, safe and intuitive, without tools.
Features:
| HSE |
 |
- Very safe, fast and easy to operate
- No potential falling objects
- Very low pre-tension needed to activate seal
- No high torque or high pressure needed to make up connection
- Reduced exposure time in hazardous area for rig crew
- Safe and intuitive locking mechanism
|
| LOW LIFE CYCLE COST |
| Extremely fast make and break (15 sec.) |
- Reduced production shutin time
- Less rig-time needed to run riser
- Allows a smaller weather window
Stab-in sleeve locked connection |
- No threads no re-cuts -> less maintenance costs
- Easy to switch out wear and tear parts -> less maintenace costs
Made of Sandvik SAF 2507 (UNS 32750) |
- No corrosion allowance needed -> less weight
- No coating needed -> less cost
- No sandblasting and re-painting during life -> less storage costs
- No preservation needed -> less storage costs
- Sour and standard service -> one system fits all
Metal to metal re-usable seals |
- No need to switch out at each make and break -> less costs
No extra crew or tools to run riser |
- Can be handled by rig crew -> less handling costs
- No torque tools needed -> less handling costs
|
|
